Archive for the ‘Plumbing’ Category

Common Plumbing Problems at Home

Tuesday, January 24th, 2017
Different tools for Plumbing

Plumbing tools for home

Frankly speaking, there are many plumbing problem that might occur in your home. Taking from breakage in your water lines to the leaky faucet installed. Even, certain are more common than other, and thankfully, they are the easiest ones to fix. Here are the common plumbing problems that might be faced by the home owners.

Plumbing problems:

Blocked toilet:

A blocked toilet plumbing problem is one of the worst yet urgent plumbing issues to be solved by the home owners. If your observe this to be in your home, turn off the water supply to your toilet for stopping the situation of overflowing.

Next thing is to take the plunger and push it down into the toilet bowl. It’s advisable of repeating this action for several times for getting rid of your toilet blockage. There is a specialized plunger available in the market, which are specifically shaped top fit in the toilet bowl and it’s advisable of using this, instead of using the round shaped one.

If this also doesn’t work for you, you’ll require a special metal line. It is often referred by the name of snake. It is used for running into the toilet for cleaning the accumulate blockage. If you’re facing a regular plumbing problem of toilet blockage in your bathroom, it’s advisable of investing in a snake than calling for a contractor every alternate time.

Blocked kitchen sink:

Every home owner have had experiences blocked sink once in their life. There are many reasons behind the buildup like building up of grease or old food residue that have been washed over the period of time in that sink.

We all know about this, but the easiest way of getting rid of such blockage from the sink is by making the use of round shaped plunger. Start by placing the cup of the plunger on the drain and push towards up and down. Repeat the process several times and try hard for cleaning the blocked sink. If you think, it’s not working, make the use of snake wire for clearing the blockage.

Make the use of drain snake for dislodging the blockage. You can also place a bucket underneath the sink ad unscrew the drains. Take off the pipe and clean it by using a wire for clearing the accumulated blockage and re-attach the pipe once again to the sink.

Leaky faucet:

One of the single most common plumbing problems is a leaky faucet. You might not know but a leaky faucet has the capacity of increasing your energy consumption bills in your home. But for repairing the plumbing problem, you’ll require to shut off the water mains of your home. Start by removing the faucet cover and unscrew the handle of the faucet. Remove it gently for not damaging your hands.

At the bottom section of the faucet you’ll observe a washer. It’s advisable of removing it and replace it with the new one. Don’t forget to check the correct size of the washer. After placing the new washer, screw the handle of the faucet back to its place. Turn the water on for observing any leakage that is still prevailing in your home.

Water Seepage

Monday, December 20th, 2010

Well to start with it can be said that in the modern era the problem of water seepage is a common one and it does indeed cause a huge concern to the home owners. It is indeed sad if you have to live with this problem after having spent so much of money over your house. This is a process that involves the seepage of water either from the basement or forms the walls.

This is in fact a common problem for people residing in humid and swampy areas. The problem of water seepage is a common one for people in the area where it rains heavily and where it remains moist all around the year. The best way to deal with this problem is to fix the leak that exists. The problem is a major one and must be addressed in time. There are many data and facts available about the process of fixing the leak at the cyber space.

How to Fix Water Pressure Issues

Tuesday, June 29th, 2010

Low water pressure causes immense problem in many houses. The reason for this is an improper size of the pipe. Even if water supply is convenient still there are chances that the pressure of water may get low because the size of the pipe is causing an hindrance in the speedy flow of the water. However, some of the essential reasons for the problem include corrosion of the pipeline. As a result of this pressure of the water gets decreased. Due to this when two people open two taps at the same time water flow becomes worse for the moment.

Water pressure can also get affected due to leaking slabs, and pipes getting fractured. To fix this problem you surely need the help of a professional. Unsuitable geographical location can also cause a decrement in the pressure of water. However, do not try anything yourself unless you have the knowledge. It is always better to consult an expert in this field before taking necessary steps.

Plumbing Problems in your Toilet

Saturday, June 26th, 2010

As a toilet is a place which you need to use so often it can develop imperfections quite easily. It is a place where each member of the family spend a considerable amount of time and make frequent use of all essential properties and thus there are chances of regular dents and damages within the area. Dripping tank is one of the several problems that your toilet may have. The wax seal loosens up making the tank drip all the time.

When the contactor has inspected the condition and applied a new wax seal conditions do have the chance to improve. When there is excessive steaming your toilet bowl can drip. If the condition is not taken care of then the place can develop fungi causing immense problem in the long run. For this you need to cushion the wall of the tank to bring the situation under control. Other plumbing problems which your toilet can face include runny toilet and plugged water closet. If not properly treated condition can indeed become worse.

Guidelines for Sewerage Pipe Works

Friday, March 26th, 2010

To ensure that hygienic conditions are maintained in a building, sewerage pipe works guidelines have to be followed carefully. The connections in the central and branch pipes have to be well arranged to ensure that there is no cross flow. The building, soil and waste sewer pipes also have to be wide enough to allow adequate flow.

The minimum gradient has to be one in 57 for a pipe that measures 100mm in diameter. For a pipe that has a 150mm diameter, the minimum gradient should be one in 100.

Make sure the appliances and pipe works are arranged to make it easy to group the connections with your water closet close to the central soil pipe. Keep your branch pipes short to prevent them from producing a lot of noise.

The sewer pipes have to be fixed when you are doing the brick work. This will prevent the need to dismantle the brick work to fix them.

Guidelines for Plumbing

Friday, March 26th, 2010

Following guidelines when handling any plumbing activity will guarantee clean hygienic condition which is a vital thing. This means that all the connections heading to the main pipes should be arranged in ways which prevents cross flow from numerous appliances. Waste and building sewer pipes must be of sufficient diameter especially on the direction of flow.

Other guidelines outlines that the pipe work and appliances be arranged in a way which allows close connection with water closet nearer to the main soil pipe. The branching pipes should at all times be kept short to reduce noise among other things. All these can be adhered to if one employs a qualified contractor for the job. You also need to search through and avoid settling for the cheaper option.
As a plumber, one should keep abreast with the changes that take place in this plumbing industry. If this happens, you will be sort countrywide by various customers.
The thing which makes traditional home construction to be sort everywhere is the materials and standard used during the development process.

Sewerage and Plumbing System

Friday, March 26th, 2010

Sewerage and Plumbing System are essential in carrying waste material from a building to a designated public sewer system. In situations where the public sewerage does not exist, other alternatives such as septic tank or socking pits can be used. It is vital to note that a building cannot function without an efficient plumbing system in place.

A plumbing system is made up of numerous pipes that work together with one purpose. This means that a pipe of waste water from the baths, sinks and wash basins are connected to one pipe. If one pipe is missing then the plumbing system cannot work at all. Most of the sewerage and plumbing system of reputable buildings are normally serviced on regular occasions to keep them in perfect conditions.
Such maintenance practices don’t cost much, meaning they can be scheduled as a mandatory practice for any building owner. The step will reduce on major expenses if left unattended to.

Guidelines for Fixing Rain Water Pipes

Friday, March 26th, 2010

Rain water is normally made up of storm water, street wash industrial wash among other mixtures. This therefore needs proper water pipes so as to avoid contamination to any of the occupants. A good fixed water pipe makes a person’s home look neat, safe and clean through out the year. To enjoy that, you need to contract qualified contractors who will guarantee that. Other than that, you need to familiarize yourself with the pipes fixing guidelines.

One of these guidelines includes the fixation of water pipes onto the external walls of the building structure. Ensure that the bell mouth inlet at the roof’s surface is always provided as a mandatory requirement. The available pipes must always discharge rain water away from the compound to avoid breeding areas of insects. If this is keenly followed, water pipes can be of high quality and last for longer period of time.